MANUALS · STEERING [37] · страница 2 из 52 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Технические характеристики
Номинальные и предельные значения
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Items | Specifications |
|---|---|
| Standard value | |
| Steeering angle | |
| Inner wheel | 32*40' |
| Outer wheel | 29*45' |
| Steering gear oil level mm (in ) | 25 (0.98) |
| Stationary steering effort N (kg, Ibs ) | 37 (3.7, 8.2) |
| Drive belt tension mm (in.) | |
| 2400 | |
| When checked | 6.0-10.0 (0.236-0.394) |
| When new belt is installed | 5.5 (0.217) |
| When an old belt is installed | 7.0 (0.276) |
| 3000 ~ 12 VALVE | |
| When checked | 9.0-14.5 (0.354-0.571} |
| When a new belt is installed | 8.0 (0.315) |
| When an old belt is installed | 10.0 (0.394) |
| 3000-24 VALVE | |
| When checked | 10.5-14.5 (0.413-0.571) |
| When a new belt is installed | 9.5-11.5 (0.374-0.452) |
| When an old belt is installed | 11.5-13.5 (0.452-0.531) |
| 3500 | |
| When checked | 13.0-17.0 (0.511-0.669) |
| When a new belt is installed | 11.0-13.0 (0.433-0.511) |
| When an old belt is installed | 14.0-16.0 (0.551-0.630) |
| 250D | |
| <Vehicles built up to October; 1993> | |
| When checked | 9.0-11.0 (0.354-0.433) |
| When a new belt is installed | 7.0 (0.276) |
| When an old belt is installed | 9.5 (0.374) |
| <Vehicles built from November; 1993> | |
| When checked | 8.0-12.0 (0.315-03472) |
| When a new belt is installed | 6.0-8.0 (0.236-0.315) |
| When an old belt is installed | 9.0-11.0 (0.354-0.433) |
| MPa (kglcm? , psi) Oil pump pressure | |
| <2400, 3000-12 VALVE, 2500D> | |
| Oil pump relief pressure | 7.5-8.2 (75-82, 1,067-1,166} |
| Pressure under no-load conditions | 0.8-1.0 (8-10, 114-142) |
| Steering gear retention hydraulic pressure <3000-24 VALVE, 3500, 2800D> | 7.5-8.2 (75-82, 1,067-1,166) |
| Oil pump relief pressure | 8.3-9.0 (83-90, 1,195-1,280) |
| Pressure under no-load conditions | 0.8-1,0 (8-10, 114-142) |
| Steering gear retention hydraulic pressure | 8.3-9.0 (83-90, 1,195-1,280) |
Оригинальная страница руководства
