MANUALS · STEERING [37] · страница 28 из 52 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE POINTS OF DISASSEMBLY

2REMOVAL OF PITMAN ARM

REMOVAL OF SIDE COVER AND CROSS-SHAFTAS- SEMBLY

Withthemainshaft and cross-shaft placed in the straight
ahead position, tap the bottom of the cross-shaft with
plastic hammer to take out the cross-shaft together with
the side cover.

10. REMOVAL OF Y-PACKING

Do not remove the Y-packing at the rear of the needle
bearing unless there is fluid leakage from the threads of
the adjusting bolt. If there is leakage, replace the Y-pack-
ing witha new one_

13. REMOVAL OF RACK PISTON

Remove the rack piston from the mainshaft by turning it
counterclockwise.

Caution

Be careful not to lose the 26 balls inside the rack pis-
ton;

19. REMOVAL OF LOCK NUT

20. REMOVALOFMAIN SHAFT/21_BEARINGRACE/22, CAGE/23. BALL

When removing the main shaft,remove it while pressing
the bearing race so that the balls do not come out;

Feb. 1991

Оригинальная страница руководства