MANUALS · STEERING [37] · страница 21 из 52 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

24. INSTALLATION OF SNAP RING

22. INSTALLATION OF STEERING SHAFT, LOWER

When installing, align the matingmark (yellow line)on
the steering shaft lower with the groove on the steering
shaft upper yoke_

19. INSTALLATION OF LOWER PIPE/18. CLAMP

(1) Insert the lower pipe into the steering column lower
until the bearing touches the snap ring on the steer-
ing shaft lower,

(2) Install the clamp in the position shown in the illustra-
tion.

17 . INSTALLATION OF CLEVIS PIN

Insert theclevis pinbytappingit until the protruding
length is as shown in the illustration.

INSTALLATION OF JOINT ASSEMBLY

When installing, align the groove on the joint voke with
themating mark (yellow line) on the steering shaft lower.

Mitsubishi Motors CorporationFeb.1991

Оригинальная страница руководства