MANUALS · STEERING [37] · страница 34 из 52 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

20. INSTALLATION OF VALVE HOUSING

(1) Apply specifiedautomatic transmission fluidtothe
sealring of the rack piston:
Specified fluid:Automatictransmissionfluid
DEXRON or DEXRON II

2) Insert the valve housing:

3)Rotate the main shaft until the rack pistonmoves to
the neutral position (center).

24. INSTALLATIONOF ADJUSTINGPLATE/25ADJUST- ING BOLT

(1) Install the adjusting plate so that the beveled part is
facing downward:

(2) Usingthicknessgauge,measuretheclearance
between the adjusting bolt and crosS-shaft:
Standard value:0-0.05 mm (0-0.002 in )

(3) Iftheclearanceisexceededthestandardvalue,
replace witha suitable adjusting plate_

26. INSTALLATIONOFCROSS-SHAFT/27ADJUSTING BOLT LOCK NUT

Install the cross-shaft to thesidecover,and then tem-
porarily tighten the adjusting bolt lock nut;

29. INSTALLATION OF SIDE COVER AND CROSS-SHAFT ASSEMBLY

Install the side cover assembly (with the cross-shaft} to
the gear box:

NOTE

Apply specified automatic transmission fluid to the teeth
andshaft areasofthe rack piston,and apply multipur-
pose grease to the oil seal lip.

Specified fluid:AutomatictransmissionfluidDEX-
RON or DEXRON II

Caution

Do not rotate the side cover during installation. Take
care not to damage the cross-shaft oil seal

Оригинальная страница руководства