1984-Montero · electrical a · страница 81 из 169 · Открыть оригинал PDF ↗
stator
1. Make continuity test on stator coil. Check to ensure that
there is continuity between coil leads.
If there is no continuity, replace stator assembly.
21 Check coil for grounding. Check to ensure that there is
no continuity between coil and core. If there is con-
tinuity, replace stator assembly.
Ret tifier
1. (+) HEATSINK ASSEMBLY TEST
Check for continuity between (+) heatsink and stator
coil lead connection terminal with a circuit tester. If
there is continuity in both directions, diode is shorted.
Replace rectifier assembly.
2. (-) HEATSINK ASSEMBLY TEST
Check for continuity between (-) heatsink and stator
coil lead connection terminal. If .there is continuity in
both direction, diode is shorted, and rectifier assembly
must be replaced.
3. DIODE TRIO TEST
Check three diodes for continuity by connecting a
circuit tester to both ends of each diode. If there is no
continuity or no continuity in both directions, diode
is defective and heatsink assembly must be replaced.
Оригинальная страница руководства
