1984-Montero · electrical a · страница 142 из 169 · Открыть оригинал PDF ↗
SEAT BELT WARNING SYSTEM
1. If the driver turns the ignition key to “ON” while his seat
belt is unbuckled, the seat belt warning system is acti-
vated to provide an audible and visual reminder through a
buzzer and light to fasten the seat belt properly.
Seat Belt Switch
CONTINUITY TEST
1. Pull back the floor mat and disconnect th.e seat belt
switch connector from where it is at the attachment to
the buckle stalk assembly.
2. Use an ohmmeter to check for a short circuit at the 0.3-Y
wire and the 0.3-RB wire of the, driver’s seat belt switch.
(16W732)
3. If the ohmmeter reads no resistance with the buckle
unlocked and indicates an open circuit when the buckle is
locked, the belt switch is operating properly.
4. If a microswitch is defective, the buckle stalk assembly
containing microswitch should be replaced. For replace-
ment, see GROUP 23.
Оригинальная страница руководства
