Pajero II Workshop Manual 1991 · Электрооборудование двигателя · страница 11 из 54 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
B" terminal:
(5) Disconnect the alternator output wire from the alternatorB" terminal:
(6) ConnectDCtest ammeter withrangeof 0-100inseriesbetween the'B"terminal and the
disconnected output wire. (Connect the (+) lead of the ammeter to the'B" terminal, and then connect the
(-) lead of the ammeter to the disconnected output wire:
Battery-voltage sensing type
Alternator-generation-voltage sensing type
0180467
Service Adjustment Procedures _
Connect a tachometer. (Refer t0 GROUP1 1
(8) Reconnect the negative battery cable
(9) Turn the ignition switch to the ON position ad check that the reading on the voltmeter is equal to the
battery voltage
NOTE
If the voltage is 0 V, the cause is probably a open circuit in the wire or fusible link between the alternator
"Sterminal and the battery (+) terminal:
(10) Check to be sure that all lamps ad accessories are off.
ADDED
Оригинальная страница руководства
