Pajero II Workshop Manual 1991 · Электрооборудование двигателя · страница 21 из 54 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

RESISTIVE CODE INSPECTION

Measure the resistance of the high tension cable and all spark
plug leads_

(1) Checkcapand coating for cracks.

(2) Measure resistance_

Limit: Max: 26 kS2

IGNITION COIL INSPECTION

<4G64, 6G72-12 VALVE>

(1)Measurement of the primary coil resistance
Measure the resistance of the positive+) terminal and
negative (~) terminal of the ignition coil.

Standard value:0.72-0.88 $2

(2) Measurement of the secondary coil resistance
Measure the resistance between the ignition coil's posi-
tive+) terminal and the high tension terminal:
Standard value:10.29-13.91kn

<6G74,6G72-24 VALVE>

(1)Measurement of the primary coil resistance_
Measure the resistance between the terminals for each cylinder
(No.1-No.4,No.2-No5, No. 3-No. 6) of the ignition coil as
shown in the illustration

Standard value: 0.69-0.85 n

(2)Measurement of the secondary coil resistance_
Measure the resistance between the high-voltage terminals for
each cylinder (No.1 - No.No; 2-No. 5, No. 3-No. 6) of the
ignition coil as shown in the illustration.

Standard value: 15.3-20.7 kn

POWER TRANSISTOR INSPECTION

<4G64, 6G72-12 VALVE>

NOTE

Mitsubishi Motors CorporationJun: 1994

An analogue type of circuit tester shouldbe used.
2Connect the circuit tester (~) probe (black) to terminal (3).

(1) Connect the negative (~) terminal of the 1.5V power supply
to terminal (2) of the power transistor: then check whether
there is continuity between terminal (3) ad terminal (2)
whenterminal (1)andthe positive71terminalare
connected and disconnected

Terminal (1) and (+ ) terminal

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Terminal (1) and (+ ) terminal	Terminal (3) and termi- nal (2)
Connected	Continuity
Unconnected	No continuity

(21) Replace thepower transistor if there isa malfunction.
PWJE9086-FREVISED

Оригинальная страница руководства