Pajero II Workshop Manual 1991 · Электрооборудование двигателя · страница 52 из 54 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

(5) Measure the voltage immediately after the ignition switch is
turned to ON (without starting the engine).

Standard value9-11V

Drops to0 V after 4-8 seconds have
passed)

In addition,check to be sure that the glow indicator lamp
(red) illuminates and then switches off immediately after the
ignition switch iS turned to ON.
NOTE

The time during which the voltage appears (energising time)
will depend on the engine coolant temperature

(6) Measure the voltage while the engine iS cranking:

Standard value: 6 V or more

(7) Start the engine and measure the voltage while the engine iS
warming up
However;if the engine coolant temperature rises above
60*€ (140PF) or when 180 seconds have passed since the
engine was started, the voltagewillnormally return to 0 V:
(Refer to the GlowPlugEnergisation Timing Chart )

Standard value: 12-15 V

<Reference >

Оригинальная страница руководства