1989-Mitsu-Factory Manual · fuel system · страница 13 из 53 · Открыть оригинал PDF ↗
(17)Turn off the ignition switch.
(18)Connect the oxygen sensor connector.
(19)lnstall the concealment plug into the hole to seal the idle
mixture adjusting screw.
THROlTLE OPENER ADJUSTMENT FOR AIR CON- DITIONER
N14FKBC
The throttle opener (idle-up actuator) described here controls
the idle speed when the air conditioning is applied.
NOTE
Check the ignition timing and idle speed before performing
this adjsutment.
Inspection Conditions
Engine coolant temperature : 85 - 95°C (185 - 205°F)
Lights and accessories : Set to OFF
Transmission : Neutral
Steering wheel : Straightforward (vehicles with a power-
steering)
(1) Start the engine.
(2) Set the tachometer.
(3) Turn on the air conditioner switch.
NOTE
The solenoid valve will open and the intake manifold
vacuum will act on the throttle opener to fully actuate it.
(4) Check the engine speed during this operation.
Standard value : 900-950 rpm
If the engine speed is out of specification, adjust using the
throttle opener (for air conditioner) adjusting screw.
THROTTLE POSITION SENSOR ADJUSTMENzwm(;
(I) Loosen the accelerator cable enough.
Оригинальная страница руководства
