1989-Mitsu-Factory Manual · fuel system · страница 35 из 53 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
1. REMOVAL OF AIR CLEANER
Refer to GROUP 11 - Air cleaner.
7. DISCONNECTION OF MAIN HOSE/I. RETURN HOSE
(1) Before disconnection of the fuel hose, remove the fuel
tank cap to lower the pressure in the fuel thank.
(2) With the receiver placed under the fuel inlet fitting to
receive fuel left in the hose, remove fuel hose from the
carburetor inlet nipple.
9. REMOVAL OF CARBURETOR
NOTE
When the carburetor is removed, keep it horizontally SO as
not to spill fuel from the carburetor.
SERVICE POINTS OF INSTALLATION NludDAc
. ADJUSTMENT OF ACCELERATOR CABLE FREE PLAY
Refer to P.l4-102.
1. INSTALLATION OF AIR FILTER
Refer to GROUP 11 - Air cleaner.
DISASSEMBLY AND REASSEMBLY
Diassembly steps
1. Throttle-return spring
2. Damper spring
3. Throttle-return spring bracket
4. Throttle opener/Dash pot
I Carburetor assembly and gasket kit
5. tlractcet -...
6. Hose
7. Vacuum-delay valve
-12
8. Hose
9. Screw
l + l + ‘10. Float chamber cover assembly
11. Float chamber cover gasket
1’2. Mixing body and throttle body assembly
NOTE
(1) Reverse the disassembly rocedures to reassemble.
(2) *I+ : Refer to ;Servjce 8- o!nts of Disassembly’.
1Z31 + : Refer to Service Potnts of Reassembly
d : Non-reusable Parts
Оригинальная страница руководства
