1989-Mitsu-Factory Manual · fuel system · страница 44 из 53 · Открыть оригинал PDF ↗
29. lNSTALLATION OF BIMETAL ASSEMBLY
(1) Fit the bimetai end over the choke valve lever.
(2) Install the plate and temporarily tighten the screw.
(3) Align the mating marks.
(4) Set the rivet as illus_trated.
(5) install the bimetal assembly using a hand rivetter or -
similar tool with the mating marks aligned correctly.
(6) Tighten the screw.
Оригинальная страница руководства
