1989-Mitsu-Factory Manual · fuel system · страница 19 из 53 · Открыть оригинал PDF ↗
Caution
All carburetors have a tamper-proof choke. The choke-
related parts are factory adjusted. The choke adjustment is
not required during service, except when major carburetor
overhaul or choke carburetor related parts adjustments are
needed by state or local inspections.
(1) Check that the alignment marks on the electric choke and
bimetal assembly are lined up. If not, align the marks.
NOTE
1. For removal of the bimetal assembly, refer to DISAS-
SEMBLY AND REASSEMBLY (P.14-35). -for the Feder-
al/California.
2. Misalignment and resultant symptom.
| -~I |
|---|
Таблица в оригинале
| Poorer startability and more likely |
|---|
Таблица в оригинале
(2) Check that engine coolant temperature is below 10°C (50°F).
(3) Start the engine and check operation of the choke valve and
fast idle cam, with hand on the electric choke body.
| Electric choke body | Gets gradually hotter after engine Start |
|---|---|
| Choke valve | Opens as bimetal temperature IiSeS |
| Fast idle cam | Fast idle control is released as en- gine coolant temperature rises and fast idle breaker operates |
Таблица в оригинале
(4) If the electric choke body remains cool even after the engine
is started, check the electric choke.
Оригинальная страница руководства
