1989-Mitsu-Factory Manual · fuel system · страница 28 из 53 · Открыть оригинал PDF ↗
FBC SYSTEM CHECK PROCEDURE CHART (Use FBC Test Harness MD9994383
| ECI Ch Opera Select switch | ecker tion Check Switch | Check Item | Engine control unit Terminal No. Checked | C | ondition | Test Specification |
|---|---|---|---|---|---|---|
| I 1 | I Power supply | 12 | Ignition switch “LOCK-- ON” | |||
| / 2 | I Ignition pulse | 5 | Ignition switch “LOCK- START’ | 2V to 8V | ||
| 3 | Throttle position | 2 | Ignition switch “LOCK ON” | Accelerator fully closed | 0.4v to 0.N | |
| sensor | I I | - | Accelerator fully opened | 4.5v to 5.5V | ||
| 4 | Engine coolant | 3 | lgniton switch “LOCKON” | 0°C (32-F) | 3.4v to 3.W | |
| temperature sensor | I I | - | 20°C (68°F) | 2.4Vtc 2.7V | ||
| 5 | Power supply for sensor | 8 | Ignition switch .’ “LOCK-c ON” | 4.94 to 5.5v | ||
| Setto ‘;4” | 6 | |||||
| 7 | Vacuum switch for idle | 10 | Ignition switch “LOCK-, ON” | 9vto 13v | ||
| position | Idling (warm engine) | ov to 0.w | ||||
| 9 | Feed back solenoid valve | 52 | Ignition switch “LOCK-t ON” | sv | ||
| Idling (warm engine) | zvto 12v | |||||
| 10 | Slow cut-off lid l | 56 | idling | - | OV to 0.6V | |
| soeno vave | Cluick deceleration from with “N” position | above 4000 rpm to idling | Momentarily sv | |||
| I | 11 |
Таблица в оригинале
NOTE
SV = System Voltage
Оригинальная страница руководства
