1989-Mitsu-Factory Manual · fuel system · страница 53 из 53 · Открыть оригинал PDF ↗
-INSPECTION WI4KW
l Check the fuel hoses and pipes for cracks, bends,
deformation, deterioration or clogging.
l Check the fuel filter for clogging or damage.
l Check the canister for clogging or damage.
-INSPECTION
CHECKING PURGE CONTROL VALVE
(1) Make sure that the cooling water is at a temperature
between 80 and 90°C (180 and 190°F).
(2) Disconnect the purge control hose from the air cleaner
and blow into the purge hose. If the valve is not open, its
operation is normal. Then start the engine and increase
the engine speed to 1,500 to 2,000 rpm and blow into the
purge hose. If the valve is not open, check for clogged or
broken vacuum hose, or malfunctioning therm0 valve.
NI4KDAD
SERVICE POINTS OF INSTALLATION
7. INSTALLATION OF VAPOR HOSE/4. RETURN HOSE/B.
MAIN HOSE
When attaching the hose to the pipes, be sure that the
hose is attached unit1 its end comes in touch with the
bulge of the pipe as shown in the illustration.
Оригинальная страница руководства
