Pajero II Workshop Manual 1991 · Автоматическая коробка передач · страница 105 из 128 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Проверка работы селектора
SELECTOR LEVER OPERATION CHECKE23FOAB
Shift selector lever to eachrangeand check that lever
moves smoothly and is controled.Check that positionin-
dicator is correct:
2Check tobe suretheselector levercanbe shiftedto
each position (bybutton operationasshown inthe
lustration) .
3_Start the engine ad check if the vehicle moves forward
whentheselector leveris shiftedfromNtoDand
moves backward when shifted to R.
When the shift lever malfunctions, adjustcontrol cable
and selector lever sleeve. Check for worn shift leveras-
sembly sliding parts
ADJUSTMENTOFINHIBITORSWITCHAND CONTROL CABLEE23FOAH
INHIBITOR SWITCH
Move the selector lever to the"'N"position.
Loosen the adjusting nut of the control cable_
Miteubiahl Motors CorporutionFeb:1991
(3)Loosen the inhibitor switch mounting bolt
Adjust by turning the inhibitor switch so that the bosses
for aligning theN"positionon the inhibitor switchare
aligned with the "Nposition adjustment lever.
(5) Tightentheinhibitorswitchmountingbolttothe
specified torque
(6) Gentlypullthe end of the transmission control cable in
the direction of the arrow and tighten the adjusting nut
to the specified torque.
Check that the selector lever is in the"Nposition.
(8) Check that each range on the transmission side operates
and functions correctly for each position f the selector
lever.
Оригинальная страница руководства
