Pajero II Workshop Manual 1991 · Автоматическая коробка передач · страница 127 из 128 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Автоматическая коробка передач

31. INSTALLATION OF TRANSMISSIONANDTRANSFER ASSEMBLY

(1)Align the engine transmission mounting bolt holes with
the transmission and transfer assembly as shown in the
illustration, and connect the transmission ad transfer as-
sembly to the engine:

6.INSTALLATION OF TRANSMISSION CONTROL CABLE ASSEMBLY

After installing the transmission control cable, adjust it by
the following procedure_
Move the selector lever to the "Nposition.
Loosen the adjusting nut,gentlypullthe end of the
transmissioncontrolcableinthedirectionofthe
arrowandthentightentheadjustingnuttothe
specified torque

INSTALLATION OF THROTTLE CONTROL CABLE
After installing the throttle control cable, adjust it by the
following procedure

Diesel powered vehicles>

(1) Removethe cablefromthe boot outercableside
until the inner cable stoppercan be seen;

(2) Openthethrottlelevercompletelyandadjustthe
cable with the adjusting nut so that the distance be-
tween the innercable stopperandtheouter cable
end is at the standard value.

Standard value (AJ:34-35 mm (1,34-1,38 in.)

<Petrol powered vehicles>

Open the throttle lever completely and adjust the cable
with the adjusting nut so that the distance between the
innerandthedustcoverend isatthe
cable stopper
standard value.

Standard value (B):0-1mm (0-0.04 in.)

Оригинальная страница руководства