MANUALS · REAR AXLE [27] · страница 4 из 50 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Номинальные и предельные значения
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Items | Vehicles with a conventional differential | Vehicles with a |
|---|---|---|
| or rear differential lock | limited slip differential | |
| Standard value | ||
| Axle shaft axial play mm (in } Limited slip differential preload | 0.25 (0.0098) | 0.25 (0.0098) |
| Using special tool Nm (kgm, ft Ibs ) | 12.5 (1,25, 9) or more | |
| Without using special | ||
| Nm (kgm, ft.Ibs ) tool | 25 (2.5, 18) or more | |
| Protruding length of | ||
| stabilizer bar mounting | ||
| bolt mm (in.) | 15-17 (0.59-0.67) | 15-17 (0.59-0.67) |
| Press-fitting force of | ||
| Nm retainer ft.Ibs ) (kgm, | ||
| Initial press-fitting force | 50,000 (5,000, 11,023) | 50,000 (5,000, 11,023) |
| Final press-fitting force | 100,000-110,000 (10,000-11,000, 22,046-24,251) | 100,000-110,000 (10,000_11,000, 22,046-24,251) |
| Clearance of snap ring and retainer mm (in.) | 0-0.166 (0-0.0065) | 0-0.166 (0-0.0065) |
| Rear differential lock air | ||
| pump pressure kPa (kglcm?, psi) | 25-40 (0.25-0.40, 4-6) | |
| Final drive gear backlash mm (in.) | ||
| No. 6 differential | 0.11-0.16 (0.0043-0.0063) | 0.11-0.16 (0.0043-0.0063) |
| differential No. | 0.13-0.18 (0.0051-0.0071) | 0.13-0.18 (0.0051-0.0071) |
| No. 7.5 differential | 0.13-0.18 (0.0051-0.0071) | 0.13-0.18 (0.0051-0.0071) |
| 0.12-0.18 (0.0047-0.0071)*1 | ||
| Differential gear backlash mm (in.) | ||
| 6 differential No; | 0.010-0.076 (0.0004-0.00301 | |
| differential No. | 0-0.076 (0-0.0030) | |
| 7.5 differential No. | 0.10-0.25 (0.004-0.01) | |
| 0.15-0.20 (0.005-0.008)*1 | ||
| Drive pinion turning torque | ||
| Without oil seal Nm (kgcm, in.Ibs | ||
| With anti-rust aent | ||
| g (new) With gear oil applied | 0.6-0.9 (6.0-9.0, 5.2-7.8) | 0.6-0.9 (6.0-9.0, 5.2-7.8) |
| (new or used) | 0.4-0.5 (4.0-5.0, 3.5-4.3) | 0.4-0.5 (4,0-5.0, 3.5-4.3) |
| With oil seal Nm (kgcm, in.Ibs ) | ||
| With anti-rust agent | ||
| (new) With gear oil | 0.85-1.15 (8.5-11.5, 7.4-10.0) | 0.85-1.15 (8.5-11,5, 7.4-10.0) |
| applied (new or used) | 0.65-0.75 (6.5-7.5, 5.6-6.5) | 0.65-0.75 (6.5-7.5, 5.6-6.5) |
Оригинальная страница руководства
