SERVICE ADJUSTMENT PROCEDURES · 13

SERVICE ADJUSTMENT PROCEDURES · 13

MANUALS · REAR AXLE [27] · страница 13 из 50 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

REAR DIFFERENTIAL LOCK DETECTION SWITCH CHECKEZ7FOAA

Jack up the vehicle

2Remove the air pipe and air hose connections

3_Connecta pressure gauge ad air regulator, for adjusting
the outside air pressure, to the air hose.
Adjust the outside air pressure with the air regulator until
the pressure gauge showsa pressure of approx:25 kPa
(0.25 kglcm ,psi ) .

Caution

Do not applyhigher pressure

5.Lock thewheelon
one side of the vehicle, and slowly
turn the wheel on the other side_

6.Check for continuity in the rear differential lock detection
switch:

Иллюстрация 1, страница 13

When air is suppliedContinuity When air is releasedNo continuity

If the detection switch is defective , it cannot be removed
by itself,first removethe differential carrier toremove
the detection switch_

REARDIFFERENTIALLOCKSYSTEMAIR LEAKAGE CHECKEZ7FQAA

Remove thereardifferential lock air pump and remove
the air hose from the air pump: (Refer to P.27-26.)

2Connecta pressure gauge and air regulator, for adjusting
the outside air pressure to the air hose_

3Adjust the outside air pressure with the air regulator until
the pressure gauge showsa pressure of approx:35 kPa
(0.35kglcm ,5 psi:).

Caution

Do not applyhigher pressure:

Иллюстрация 2, страница 13

If after approximately 10 minutes have passed,the pres-
surehas droppednotmore than approximately10 kPa
(0.1kg/cm? ,psi ) , it can be concluded that there is no
leaking of air from the air hose, etc

Оригинальная страница руководства
Страница 13
100%

Назад
Сверху