MANUALS · REAR AXLE [27] · страница 5 из 50 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Items | Vehicles with a conventional differential or rear differential lock | Vehicles with limited slip differential |
|---|---|---|
| Difference in total | ||
| thickness between the left and right clutch | ||
| plates mm (in:) | 0-0.05 (0-0.020) | |
| Clearance between spring plate and | ||
| differential case mm (in) | 0.06-0.20 (0.0024-0.0079) | |
| Clearance between | ||
| friction disc and | ||
| differential case mm (in.) | 0.05-0.20 (0.0020-0.0079)*2 | |
| Difference between left and right dimensions from back thrust face of | ||
| pressure ring to end of | ||
| thrust washer mm (in ) | 0-0.05 (0-0.020) | |
| Clearance between thrust washer and differential | ||
| mm (in ) case | 0.05-0.20 (0.0020-0.0079) | |
| Clutch plate preload | ||
| When equipped with new clutch plates | ||
| Nm (kgm, ft lbs ) | 40-75 (4.0-7.5, 29-54) | |
| When equipped with | ||
| old clutch plates | ||
| Nm (kgm, ft Ibs ) | 25-75 (2.5-7.5, 18-54) | |
| Limit | ||
| Rear axle total backlash mm (in) | 5 (0.20) | 5 (0.20) |
| Drive gear runout mm (in ) | 0.05 (0.0019) | 0.05 (0.0019) |
| Differential gear backlash mm (in.) | 0.2 (0.0079) | |
| Friction plate and friction | ||
| disc warping (flatness) mm (in.) | 0.08 (0.0031)*2 | 0.08 (0.0031) |
| Friction plate and friction | ||
| disc wear (difference in the thickness of the | ||
| friction surfaces and the | ||
| projections) mm (in.) | 0.1 (0.0039)*2 | (0.0039) 0.1 |
NOTE
Vehicles with rear differential lock
*23Vehicles with rear differential lock <3000>
Оригинальная страница руководства
