MANUALS · REAR AXLE [27] · страница 49 из 50 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE POINTS OF REASSEMBLYEZ6WNAB BACKLASHADJUSTMENTONDIFFERENTIALGEAR CASE B SIDE

Adjust backlashon differential gear caseB side asfol-
lows_

(1) Temporarily install sidegearspacer (LH);side gear
(LH);washers,2 piniongears and pinion shafton
case B

NOTE

Do not assemble pinion shaft holder, pinion shaft-B
or the remaining pinion gears (2).

(2) Insert wrapped screwdriver through side of case B to
lock one side of pinion gear and side gear (LH)

(3) Placedialgaugeonunlockedpiniongearand
measure differential gear backlash within the standard
value_

NOTE

Measure2 pinion gears_

Standard value:

Conventional differential

0.10-0.25 mm (0.004-0.01 in:)
Vehicles with rear differential lock
0.15-0.20 mm (0.005-0.008 in.)

(4)Whenbacklashexceedsthestandard value, adjust
with selected side gear spacer (LH).

(5)Install washers, pinion gears, pinion shaft holder ad
pinion shaft-A and B.Lock with lock pin through case
B_

BACKLASHADJUSTMENTONDIFFERENTIALGEAR CASEA SIDE

Adjust backlash as follows,

(1) Installsidegear(RH)and2sidegearspacers
[1.0 mm (0.039 in.) thick]. Press differential caseA to
differential case B_

Оригинальная страница руководства