1984-Montero · rear axle a · страница 2 из 43 · Открыть оригинал PDF ↗
Общие технические характеристики
| Vehicles with conventional differential | Vehicles with limited slip differential | |
|---|---|---|
| Axle shaft | ||
| Type | Semi-floating type | Semi-floating type |
| Shaft dimensions | ||
| Bearing portion dia. mm (in.) | 40 (1.57) | 40 (1.57) |
| Center portion dia. mm (in.) | 34.5 (1.36) | 34.5 (1.36) |
| Overall length mm (in.) | 700.5 (27.6) | 700.5 (27.6) |
| Bearing | ||
| O.D. x I.D. mm (in.) | 80 x 40 (3.15 x 1.57) | 80 x 40 (3.15 x 1.57) |
| Differential | ||
| Reduction gear type | Hypoid,ge,ar | Hypoid gear |
| Reduction ratio | ||
| Manual transmission . | 41625 | 4.625 |
| Optional for Federal (not available in California) | 4.875 | 4.875 |
| Automatic transmission, | 4.222 | 4.222 |
| Optional for Federal (not available in California) | 4.625 | 4.625 |
| Differential lock type : | i - 1 | Disc type |
| Differential gear type and configuration | ||
| Side gear | Straight bevel gear x 2 | Straight bevel gear x 2 |
| Pinion gear | Straight bevel gear x 2 | Straight bevel gear x 4 |
| Number of teeth | ||
| Drive gear | ||
| Manual transmission | 37 | 37 |
| Optional for Federal (not available in California) Ai ii | 39 | 39 |
| utomatc transmsson. | 38 1 | 38 |
| Optional for Federal (not available in California) Di ii | 37 | 37 |
| rve pnon | ||
| Manual transmission | 8 | |
| Automatic transmission | 9 | |
| Optional for Federal (not available in California) | 8 | |
| Sid | 14 | |
| e gear Pinion gear | 10 |
Таблица в оригинале
Оригинальная страница руководства
