1987-Montero · Rear Axle a · страница 50 из 56 · Открыть оригинал PDF ↗
(3) ‘Using the spec:ial tool (MB990201-Ol), adjust the
Ibacklash to standard value by moving the side bearing
nut as shown.
(6) Check the final tooth contact. If poor contact is evident,
rnake adjustment. (Refer to P.3-29.)
(7) Measure the drive gear runout.
Limit : 0.05 mm (.0020 in.)
If the drive gear runout exceeds the limit, reinstall by
changing the phase of the drive gear and differential
case, and remeasure.
Оригинальная страница руководства
