MANUALS · FRONT AXLE [26] · страница 8 из 64 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE ADJUSTMENT PROCEDURES FRONT AXLE TOTAL BACKLASH CHECKEZ6FBAA

If the vehiclevibrates ad producesbooming sound,
measurethefrontaxletotalbacklash bythe following
seeif the differentialre-
procedure tocarrier assembly
quires removal

(1) Onvehicleswith free-wheelinghub,shiftinto
wheel drivve position.

NOTE

On vehicles with manual free-wheeling hub, place the
control handle in the LOCK position:
On vehicleswith automatic free-wheeling hub, place
the transfer shift lever in4H position anddrive the
vehicleto2meters (3.3 to 6.5ft.)to engage the
hub with the drive shaft

For vehicles with super select 4WD, place the trans-
fer control lever in 4H position and drive the vehicle
until the4WD indicator changes from flashing to il:
luminated:

(2)Hold the wheels and place the transfer control lever
in 2H position

(3) Turn the companion flange clockwise until all play is
removedMate mark on the dust cover of the com-
panion flange with that on the differential carrier.
(4)Turn the companion flange counterclockwise until all
play is removed and measure the amount of distance
through which the mating marks moved:

Limit:

Vehicles with free-wheeling hub
14mm (0.55 in.)

Vehicles without free-wheeling hub

11 mm (0.43 in.)

2If the backlash exceeds the limit, remove the differential
carrier assembly and final drive gear,and check for dif-
ferential gear meshing condition and drive shaft or inner
shaft spline looseness

FRONT AXLE GEAR OIL LEVEL CHECKEZ6FCAA

Remove the filler plug;andcheck the gear oil level:Check
that gear oil level is not 8mm (0.31in) below the bottom
of filler plug hole_

Specified gear oil:Hypoid gear oil API classification GL-
Orhigher ,SAEviscosityNo: 90,
80w[1.20dm(1.27U.S.qts-,
1.05 Imp.qts )]

Оригинальная страница руководства