MANUALS · FRONT AXLE [26] · страница 35 из 64 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Feb_1991
Mitsubishi Motors Corporation
(2) After the special toolhasbeen installed as shown,
tighten thenut ofthe special tooluntil the portion
A"of the specialtooltouchesthe bearingouter
race.
(3)Press out the inner shaft from the bearing
Caution
Do not allow the inner shaft to drop.
SERVICE POINTS OF REASSEMBLYEZ6TGAC
5INSTALLATION OF DUST SEAL
Press-fitthenewdustsealinto thehousing tubeby
using the special tools, until it is flush with the housing
tube end face
INSTALLATION OF DUST COVER
Usingsteel pipe, forcenewdust coverontothe
inner shaft.
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Steel pipe | mm (in:) |
|---|---|
| Overall length | 50 (1.7) |
| Outside diameter | 75 (3.01 |
| Wall thickness | (0.2) |
2INSTALLATION OF BEARING
Usingthe special tool,force the bearing onto the inner
shaft.
Оригинальная страница руководства
