MANUALS · FRONT AXLE [26] · страница 14 из 64 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
SERVICE POINTS OF REMOVAL
REMOVAL OF COVER
(1)Place the free-wheeling hub in the free condition_
NOTE
The free conditioncanbeobtainedby shiftingthe
transfershift levertothe2Hpositionandthen
moving in reverse forto 2meters (3.3 to 6.5ft)
(2)Remove the automatic free-wheeling hub cover
NOTE
When the cover cannot be loosened by hand,use an
oil filterwrenchwithprotectivecloth in between
not to damage the cover
REMOVAL OF FREE-WHEELING HUB COVER
(1) Set the control handle to the FREE position
(2) Remove the free-wheeling hub cover.
Mitsubishi Motors CorporationFeb.1991
5REMOVAL OF SNAP RING
REMOVAL OF BOLTS (Vehicles with automatic free-
wheeling hub)
11. REMOVAL OF FRONT BRAKE ASSEMBLY
(1) Removethe frontbrakeassemblywiththebrake
hose connected.
(2) Use wire to suspend the front brake assembly from
theupperarmSOthatthe frontbrakeassembly
won't fall.
Caution
Do not twist the brake hose
14. REMOVAL OF LOCK NUT/15. FRONT HUB ASSEMB-
LY
(1) After the lock washer has been removed, remove the
lock nut with the special tool.
(2) Removethefronthub assemblyfromtheknuckle
together with the inner and outer bearings:
Оригинальная страница руководства
