MANUALS · FRONT AXLE [26] · страница 64 из 64 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

(3) Placedialgaugeonunlockedpiniongearand
measure differential gear backlash within the standard
value.

NOTE

Measure2 pinion gears_

Standard value: 0.01-0.25 mm

(0.0004-0.0098 in.)

(4) When backlashexceedsthe standard value, adjust
with selected side gear spacer (LH)
(5)Install washers, pinion gears, pinion shaft holder ad
pinionshaft-AandBLockwithlockpinthrough
case B

BACKLASHADJUSTMENTONDIFFERENTIALGEAR CASE A SIDE

Adjust backlash as follows:

(1)Installsidegear(RH)andsidegearspacers
[1.0mm (0.039 in.) thick]Press differential case
to differential case Ba

(2) Measure flange space (C) between differential case
and B with thickness gauge_

(3) Calculate side gear. spacer (RH) thickness (D) as fol
lows:

D=2.0 mm (0.078 in)-[C+0.2 mm (0.008 in)]

(4) Choose spacer witha thickness nearest D in (3) and
adjust differential gear backlash on the right side_

(5) Match thematchmarks and assemble casesand
B_

(6) Assure smooth rotation of inner shaft_

Оригинальная страница руководства