MANUALS · SERVICE BRAKES [35] · страница 40 из 140 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

E-6When diagnosis code no. 26 is displayed

[Comment]Thismalfunctioncodeisoutputby
the ABS-ECU in the following cases:
Brokenharnesswire(thickwire)
inthecenterdifferentiallock
detection switch system
Ata vehiclespeedof15km (9
orthefree-wheel
mph)higher,
switchisOFFandthe
engage
centerdifferentiallockswitch
ON forcontinuous period of5
secondsormore(Combination
switch signal abnormality)
When the 4WD indicator circuit is
defective

(Hint)combinationswitchsignalab-
normalityoccurs atthe following
times:
Brokenharnesswire (thick wire)

inthe free-wheel engageswitch
system or defective switch (stays
OFF)

(Short in harness wire (thick wire)
inthecenterdifferentiallock
switch system or defective switch
(stays ON)
Theabovemalfunctionsarealsoaf-
fectedbythe4WDindicator,SO
might be the case that the malfunction
is caused bya troublesymptom in the
4WD indicator

2When this malfunction code is output;
andalsononeofthe4WDindicator
lamps(excludingthereardifferential
lamp) are illuminated, the cause is like-
ly to be the power circuit in the 4WD
indicator control unit:

<Vehicles built up to October, 1993>

<Vehicles built from November, 1993>

KX35-AK-03532

Оригинальная страница руководства