MANUALS · SERVICE BRAKES [35] · страница 84 из 140 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Таблица параметров текущих данных
The following items can be read by the MUT-II from the ABS-ECU input data.
When the system is normal
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Item No | Check item | Checking Requirements | Normal Value |
|---|---|---|---|
| 11 | Front-right wheel speed sensor | Vehicle speeds | |
| 12 | Front-left wheel speed sensor | D | displayed on |
| 13 | Rear-right wheel speed sensor | o a test run: | the speedome- ter and MUT-II |
| 14 | Rear-left wheel speed sensor | are identical. | |
| 16 | ABS-ECU power supply voltage | IG power supply voltage and valve monitor voltage | 9-16V |
| 25 | Free-wheelin enae switch | Engage 4WD | ON |
| g gg | Engage 2WD | OFF | |
| Center differential lock detection | Place the transfer lever at 4KLC. | ON | |
| 26 | switch | Place the transfer lever at 4H, | OFF |
| 27 | Rear differential lock detection | Turn on the switch. | ON |
| switch | Turn off the switch. | OFF | |
| Stop the vehicle | 2.5+0.12V | ||
| 32 | G-sensor output voltage | Do a test turn, | Display value fluctuates with a mean value of 2.5 V: |
| Depress the brake pedal. | ON | ||
| 33 | Stop lamp switch | Release the brake pedal. | OFF |
When the ABS-ECU shut off ABS operation:
When the diagnosis system stops the ABS-ECU, the MUT-II display data will be unreliable_
Таблица тестов исполнительных механизмов
The MUT-II activates the following actuators for testing
NOTE
If the ABS-ECU runs down, actuator testing cannot be carried out:
2Actuator testing is only possible when the vehicle is stationary: If the vehicle speed during actuator testing
exceeds 10 km/h, forced actuation will cancels_
Оригинальная страница руководства
