MANUALS · SERVICE BRAKES [35] · страница 139 из 140 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

TOOTHED ROTOR

Check whether rotor teeth are brokenor deformed, and,
SO, replace the rotor.

1480148

SERVICE POINTS OF INSTALLATION INSTALLATION OF REAR SPEED SENSOR

E35YDAE

Insertthicknessgauge into thespacebetweenthe
speed sensor's polepiece and the rotor's toothed sur-
face and then tighten the speed sensors at the position
where the clearance is the standard value.

Standard value:0.3-0.9 mm (0.012-0.035 in.)

NOTE

Check to be sure that there is no contact of the speed
sensor's pole piece and the rotor's toothed surface when
the rear hub assembly is slowly rotated one time
If there is contact, it is probable that the rotor or the rear
hub is installed incorrectly, recheck installation.

INSTALLATION OF FRONT SPEED SENSOR

Insertbetweenthe
thickness gauge into thespace
speedsensor's pole pieceand the rotor's toothedsur-
face, and check that the clearance at all points is at the
standard value.

Standard value:0.2-1.0 mm (0.008-0.039 in.)

NOTE

If the clearance between the speed sensor's pole piece
and the rotor's toothed surface is not within the standard
value range, it is probable that the rotor is incorrectly in-
stalled, recheck installation.

Оригинальная страница руководства