MANUALS · SERVICE BRAKES [35] · страница 94 из 140 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Service AdjustmentProcedures

DISC BRAKE PAD CHECK

E35FQAG

Check brakepadthickness through caliper body check port:
Standard valve:10.0 mm (0.39 in:)
Limit:2.0mm (0.079 in.)

Replace brake pads on both sides when wear exceeds limit
value.Replace both left and right brake pads ata time.

NOTE

The brake pads have been equipped with wear indicator,SO
that when the brake pad thickness reaches2 mm (0.08 in.),
thewear indicator touches :thebrakedisc and produces
warning squeaking sound.

FRONTDISC BRAKE PAD REPLACEMENTAND BRAKE DRAG CHECKE3SFQBA

Remove lock pin:Lift caliper assembly and retain with
wires

Caution

Do not wipe off the special grease that is on the lock
pin or allow it to contaminate the lock pin.

2Remove the following parts from caliper support.
(1) Pad and wear indicator assembly
(2) Pad assembly

(3)Clip

(4) Outer shim

Mitsubishi Motors Corporation

Oct 1991

3In order to measure the dragging force of the disc brakes af-
ter installation of the brake pads, use a spring balance to
measure the rotational sliding resistance of the hub in the
forward direction with the pads removed
Securely attach the pad clip to the caliper support,

Caution

Do not deposit grease or other dirt on pad or brake disc
friction surfaces

Оригинальная страница руководства