MANUALS · SERVICE BRAKES [35] · страница 49 из 140 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
<Vehicles built from November, 1993>
[Comment]This malfunction code is output when
there is an abnormality in the6 sen-
sor voltage outputThis code is also
output whenthere isbrokenwire
orshortintheGsensorpoweror
signal harness or a broken earth wire.
(Hint)Malfunctions can be distinguished bythe
G sensor output voltage read by the multi-
use tester or MUT-II service data_
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| G sensor output voltage (when vehicle is on horizontal surface) | Main problem location |
|---|---|
| 2.5+0.12V | Normal |
| 0.4V or less | Broken wire or short in the power harness or signal harness |
| 4.6V or more | Broken earth wire |
| Other than the above | G sensor is defective (including defective installation) |
Parkthevehicleon
horizontal surface and check
the Gsensorvoltage output
with themulti-use tester
MUT-II:
Оригинальная страница руководства
