MANUALS · GENERAL [00] · страница 42 из 52 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

5_After disconnecting the battery cable, wait 60 seconds or more before proceeding with the
following work: The SRS system is designed to retain enough voltage to deploy the air bag
fora short time even after the battery has been disconnected, so serious injurymay result
from unintended air bag deployment ifwork isdone on the SRS system immediately after
the battery cables are disconnected:

SRS components should not be subjected to heat over 93PCso remove the front impact sensors
SRS diagnosis unit, airbagmodule and clock spring before dryingOrbaking the vehicle afterpaint-
ing:

Recheck SRS system operability after re-installing the components

Whenever you finish servicing the SRS,check the SRS warning lamp operation tomake sure that
the system functions properly. (Refer to GROUP 52BTroubleshooting )

8_Make certain that the ignition switch is OFF when the MUT-II is connected or disconnected.

9If you have any questions about the SRS,please contact your local distributor_
NOTE

SERIOUS INJURY CAN RESULT FROM UNINTENDED AIR BAG DEPLOYMENT, SO USE ONLY THE
PROCEDURESAND EQUIPMENTSPECIFIED IN THISMANUAL.

Оригинальная страница руководства