1987-Montero · Fuel System Carb a · страница 37 из 86 · Открыть оригинал PDF ↗
(2) Check for continuity between terminals when there is and
is not current flow to the relay coil.
| Item | Measured terminals | Continuity |
|---|---|---|
| Between terminals 0 - 0 | Yes (00) | |
| Between terminals 0 - 0 | No (cdl) | |
| No power flow | pp Between terminals 0 - 0 | Yes (approx. IOOSZ) |
| Between terminals 0 -0 | Yes (00) | |
| Power flow | Between terminals 0 - @ | No (dl) |
Таблица в оригинале
NOTE
1. Andicates the current flow direction.
2. Inspect after checking the infinity of tester.
3. Tonenergize the relay coil, apply battery voltage directly to
terminals 0-O.
4. Use care as application of battery voltage to incorrect termi-
nals can cause damage to the relay.
(3) If the continuity test fails, replace the electric choke relay.
NOTE
If the electric choke body remains cool after engine start al-
though the electric choke heater (PTC heater) and electric
choke relay are normal, check the vehicle body harness circuit.
Оригинальная страница руководства
