1987-Montero · Fuel System Carb a · страница 38 из 86 · Открыть оригинал PDF ↗


(1) Remove the air cleaner.
(2) Check conditions of the choke valve according to the proce-
dures given in the table below
| Step | Engine coolant temperature | Check conditions | Choke valve when normal | Presumed cause when abnormal |
|---|---|---|---|---|
| 1 | 10°C (50°F) or lower | Before starting engine | Fully closed | Malfunction of bimetal assembly Malfunction of link |
| 10°C (50°F) or lower | Engine idling after start (Start after first fully depressing accelerator pedal one time.) | Slowly open slightly immediately after starting (Clearance: 2.5-2.7 mm (.098-.I06 in.)) | Delay valve clogged Diaphragm damaged (chamber A) | |
| 10°C (50°F) or lower | Disconnect the vacuum hose (yellow stripe) from the choke breaker during idling. | No movement | Malfunction of therm0 valve | |
| 4 NOTE | 25°C (77°F) or higher | Connect the vacuum hose (yellow stripe) and let the engine idle. | When the choke valve is lightly closed by a finger, stops at a position open more than step 2. (Clearance: approx. 3 mm (.I2 in.)) | Malfunction of therm0 valve Diaphragm damaged (chamber B) |
For information concerning the checking of the therm0 valve, refer to GROUP 25, EMISSION CONTROL SYSTEM -
Exhaust Gas Emission Control System.




