1987-Montero · Fuel System Carb a · страница 78 из 86 · Открыть оригинал PDF ↗
2. DISCONNECTION OF MAIN HOSE/3. RETURN HOSE
Before disconnection of the fuel hose, remove the fuel
tank cap to lower the pressure in the fuel tank.
4. REMOVAL OF FUEL PUMP
(1) Turn the crankshaft to place No. 1 cylinder at top dead
center on compression stroke.
NOTE
The above operation places the lift of fuel pump stroke
at the minimum position, resulting in ease of fuel pump
removal.
(2) If interference of pump lever occurs in the cylinder
head, the washer on the cylinder head bolt may be
interfering with the pump lever. Therefore, proceed as
follows:
INSPECTION NllHChC
FUEL PUMP
Make the following checks and replace as necessary.
Note that the fuel pump is a non-maintainable assembly and
must be replaced as an assembly.
l Oil or fuel leaks from breather hole
l Damage, cracks on parts
l Rocker arm for wear
Оригинальная страница руководства
