1987-Montero · Fuel System Carb a · страница 71 из 86 · Открыть оригинал PDF ↗

INSPECTION OF DASH POT
Nl4MGGA
Check that the dash pot operates normally. Resistance must be
felt when the dash pot rod is pulled. When the rod is released, it
must return quickly to the original position. If no resistance is felt
when it is pulled, the diaphragm or the check valve is broken. If the
rod returns slowly, the check valve is binding. In either case, re-
place the dash pot.


INSPECTION OF DEPRESSION CHAMBER
NllMGHA
Check the depression chamber diaphragm for damage. First, push
up the rod fully and closing tightly the nipple with a finger, release
the rod. The diaphragm is intact if the rod does not return to the
initial position while the nipple is held closed with a finger. If the
rod returns, the diaphragm is broken. Replace the depression
chamber.


MIXTURE ADJUSTING SCREW (MAS)
N14MGIA
Check the mixture adjusting screw (MA.54 for damage caused to
its taper end by overtightening etc..




