1987-Montero · Fuel System Carb a · страница 79 из 86 · Открыть оригинал PDF ↗

SERVICE POINTS OF INSTALLATION 4. INSTALLATION OF FUEL PUMP
(1) Make sure that piston in No. 1 cylinder is in the top
dead center on compression stroke.
(2) If the washer is moved after loosening of cylinder head
bolt proceed to the following items.
0 Reinstall the washer in position.


0 Tighten the cylinder head bolts to specified torque
in the sequence shown in the illustration.
0 Install the rocker cover.

1. INSTALLATION OF AIR FILTER
Refer to GROUP 11 INTAKE AND EXHAUST SYSTEM - Air
Filter.















