1987-Montero · Fuel System Carb a · страница 83 из 86 · Открыть оригинал PDF ↗

Проверка
INSPECTION N14KCAB
l Check the fuel hoses and pipes for cracks, bends,
deformation, deterioration or clogging.
l Check the fuel filter for clogging or damage.
l Check the canister for clogging or damage.



CHECKING PURGE CONTROL VALVE

(1) Make sure that the cooling water is at a temperature between
80 and 90°C (180 and 190°F).
(2) Disconnect the purge control hose from the air filter and blow
into the purge hose. If the valve is not open, its operation is
normal. Then start the engine and increase the engine speed
to 1,500 to 2,000 rpm and blow into the purge hose. If the
valve is not open, check for clogged or broken vacuum hose,
or malfunctioning therm0 valve.
SERVICE POINTS OF INSTALLATION N14KDAD 7. INSTALLATION OF VAPOR HOSE/4. RETURN HOSE/3. MAIN HOSE
N14KDAD
When attaching the hose to the pipes, be sure that the
hose is attached until its end comes in touch with the
bulge of the pipe as shown in the illustration.













