1987-Montero · Fuel System Carb a · страница 68 из 86 · Открыть оригинал PDF ↗
53. REMOVAL OF MAIN AIR JET (PRIMARY)/54. PILOT JET
(PRIMARY)/55. PILOT JET (SECONDARY)
(1) When removing the jets, use a screwdriver that is an exact
fit for their slot and work carefully to prevent damage.
53. REMOVAL OF SCREW
(1) Use a Phillips screwdriver that is an exact fit and work
carefully to prevent damage.
Caution
Do not cause burrs to the recess in screw head as they
could produce gap between throttle body and the
manifold surface.
65. REMOVAL OF MAIN JET (PRIMARY)/66. MAIN JET (SEC- ONDARY)
When removing the jets, use a screwdriver that is an exact fit
and work carefully to prevent damage.
70. REMOVAL OF ENRICHMENT JET VALVE
Caution
The valve has many small parts. Do not lose them.
(1) When removing the enrichment jet valve from the mixing
body, use a screwdriver that is an exact fit for its screw-
driver slots and work carefully to prevent damage.
(2) Using a screwdriver, loosen the enrichment jet and take
out the spring and ball from the enrichment jet valve.
97. REMOVAL OF PLUG
Оригинальная страница руководства
