Pajero II Workshop Manual 1991 · SERVICE BRAKES · страница 65 из 140 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

DIAGNOSTIC FUNCTION

DIAGNOSIS CODES CHECK

With the MUT-II

Connect the MUT-II to the diagnosis connector (16-pin), then
check diagnosis codes.

Caution

Turn the ignition switch off before connectingordiscon-
necting the MUT-II:

Without the MUT-II

Turn the ignition switch off and then disconnect the valve
relay connector:

2Use the special tool to earth diagnosis connector terminal
No. 1.

Use the special tool to earth diagnosis connector terminal
No.

3Turn the ignition switch to ON and then take a reading of the
diagnosis codes from the flashing of the ABS warning lamp
NOTE

Diagnosis code No 51 (indicating an open or short circuit in
the valve relay) will be always output; because the valverelay
connector is disconnected.

All diagnosis code numbers are the same as those when us-
ing the MUT-II:

Mitaubiahi Motors CorporationJun; 1994

Оригинальная страница руководства