Pajero II Workshop Manual 1991 · SERVICE BRAKES · страница 95 из 140 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Service Adjustment Procedures

Clean piston ad insert into cylinder with special tool.
Be careful that the piston boot does not become caught,
when lowering the caliper assembly and install the lock
pin:

Start the engine and, after strongly depressing the brake
pedal 2-3times,stop the engine
Turn brake disc forward 10 times

8Use a spring balance to measure the rotational sliding resis-
tance of the hub in the forward direction_

9Calculate the dragging force of the disc brakes (the differ-
ence between the values measured in steps 8 and 3).

Standard value: 57N (5.7 kg 13 Ibs ) or less

10. Ifthe dragging force of the disc brakes exceeds the standard
value, disassemble piston and clean the piston Check for
corrosion or worn piston seal, and check the sliding condition
of the lock pin sleeve and guide pin sleeve.

Оригинальная страница руководства