Pajero II Workshop Manual 1991 · SERVICE BRAKES · страница 84 из 140 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Таблица параметров текущих данных

The following items can be read by the MUT-IL from the ABS-ECU input data.

When the system is normal

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Item No	Check item	Checking Requirements	Normal Value
	Front-right wheel speed sensor		Vehicle speeds
12	Front-left wheel speed sensor	D tt	displayed on
13	Rear-right wheel speed sensor	o a es run.	the speedome- ter and MUT-II
14	Rear-left wheel speed sensor		are identical.
16	ABS-ECU power supply voltage	IG power supply voltage and valve monitor voltage	9-16V
25	Free-wheeling engage switch	Engage 4WD	ON
		Engage 2WD_	OFF
26	Center difterential lock detection	Place the transfer lever at 4HLC.	ON
	switch	Place the transfer lever at 4H.	OFF
27	Rear differential lock detection	Turn on the switch.	ON
	switch	Turn off the switch:	OFF
		Stopthe vehicle.	2.5+0.12V
32	G-sensor output voltage	Do a test turn.	Display value fluctuates with a mean value of 2.5 V.
33	Stop lamp switch	Depress the brake pedal.	ON
		Release the brake pedal.	OFF

2When the ABS-ECU shut off ABS operation

When the diagnosis system stops the ABS-ECU, the MUT-II display data will be unreliable

Таблица тестов исполнительных механизмов

The MUT-Il activates the following actuators for testing.

NOTE

If the ABS-ECU runs down; actuator testing cannot be carried out:

Actuator testing is only possible when the vehicle is stationary: If the vehicle speed during actuator testing
exceeds 10 km/h, forced actuation will cancels.

Оригинальная страница руководства