Pajero II Workshop Manual 1991 · SERVICE BRAKES · страница 102 из 140 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
WHEELSPEEDSENSOROUTPUTVOLTAGE MEASUREMENT <ABS >E35FPAR
Check that the clearance between the wheel speed sen-
sor and the rotor are within the standard values.
Raise up the wheels and release the parking brake
3.Remove the ABS-ECUharness connectorandmeasure
from the harness-side connector.
Caution
Be sure to remove the connector double lock and in-
sert the probe into the harness side. Inserting it into
the terminal side will result ina bad connection:
Rotatethewheelhandtobemeasuredat
byap-
proximately1/2rotationspersecond and check the
output voltageusinga voltmeter (AC mV range) or an OS-
cilloscope
<Terminal no>>
[Vehicles built up toMay;1994]
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Polarity | Front LH | Front RH | Rear LH | Rear RH |
|---|---|---|---|---|
| 52 | 51 | 53 | ||
| 57 | 56 | 18 | 58 |
[Vehicles built from June, 1994]
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Polarity | Front LH | Front RH | Rear LH | Rear RH |
|---|---|---|---|---|
| 10 | ||||
| 20 | 23 | 22 | 21 |
Output voltage:
When measuring with a voltmeter:
ZOmVormore
When measuring with an oscilloscope:
20OmVp-por more
Оригинальная страница руководства
