Pajero II Workshop Manual 1991 · SERVICE BRAKES · страница 139 из 140 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
TOOTHED ROTOR
Check whether rotor teeth arebrokenordeformed,and,if
sO, replace the rotor.
SERVICE POINTS OF INSTALLATIONE35YDAE INSTALLATION OF REAR SPEED SENSOR
Insertthickness gauge intothe spacebetweenthe
speedsensor's pole piece and therotor's toothedsur-
face and then tighten the speed sensors at the position
where the clearance is the standard value_
Standard value:0.3-0.9 mm (0.012-0.035 in )
NOTE
Check to be sure that there is no contact of the speed
sensor'$ pole piece and the rotor's toothed surface when
the rear hub assembly is slowly rotated one time_
If there is contact, it is probable that the rotor or the rear
hub is installed incorrectly. recheck installation.
INSTALLATION OF FRONT SPEED SENSOR
Insertthicknessintothebetweenthe
gaugespace
speed sensor's pole piece andthe rotor' stoothedsul -
face, ad check that the clearance at all points is at the
standard value
Standard value:0.2-1.0 mm (0.008-0.039 in.)
NOTE
If the clearance between the speed sensor's pole piece
and the rotor's toothed surface is not within the standard
value range, it is probable that the rotor is incorrectly in-
stalled,recheck installation_
Оригинальная страница руководства
