1989-Montero · auto tranny · страница 44 из 109 · Открыть оригинал PDF ↗
(7) Watch for the bearing and race behind the oil pump.
(8) Remove the torque converter housing:
(a) Remove the two 12-mm bolts and four IO-mm bolts.
(b) While holding the input shaft, remove the converter
housing.
(9) Remove the adapter and gasket.
(lO)Remove the governor mounting bolt.
(1 l)Lift up the governor retaining ring lightly by a screwdriver
and remove the governor assembly from the output shaft.
(12) Remove the governor strainer:
(a) Remove the four screws and plate.
(b) Remove the strainer from the case.
(13) Remove the oil pan and gasket:
(a) Remove the fourteen bolts.
(b) Remove the oil pan with the transmission case lifted.
Caution
l Do not turn the transmission over as this will
contaminate the valve body by foreign materials
collected in the bottom of oil pan.
Оригинальная страница руководства
