1989-Montero · auto tranny · страница 76 из 109 · Открыть оригинал PDF ↗
(11)Set the special tool on the spring retainer and compress the
springs with a shop press.
Using a screwdriver, remove the snap ring.
(12)Remove the spring retainer and twenty brake return
springs.
(13)Blow compressed air through the center support oil hole to
remove the No. 2 brake piston.
(14)Remove the No. 2 brake piston O-rings.
(15)Remove the three oil seal rings from the center support.
(16)Remove the one-way clutch assembly and oil seal rings
from the planetary sun gear.
Проверка
ONE-WAY CLUTCH ASSEMBLY
(1) Hold the No. 2 brake hub and turn the planetary sun gear.
The sun gear should turn freely counterclockwise and
should lock clockwise.
If the one-way clutch does not operate properly, replace it.
Оригинальная страница руководства
