1989-Montero · auto tranny · страница 85 из 109 · Открыть оригинал PDF ↗
(3) Remove the spring retainer and sixteen piston return
springs.
(4) With the frontend down, place the transmission case on a
workbench. Place several clean shop rags under the case to
catch the piston and sleeve. Apply compressed air to the
primaty and secondary piston oil holes to force the piston
and sleeve out.
(5) If the piston and sleeve do not come out with the
compressed air:
(a) Using needle-nose pliers, lift the primary piston from
the case.
(b) insert two long hooks behind the reaction sleeve and
gradually lift it out of the case.
(c) Using hooks, lift the secondaty piston out of case in
the same manner.
(6) Remove the O-rings from the primary and secondary
pistons and the reaction sleeve.
REPLACEMENT OF MANUAL SHAFT OIL SEALS
(1) Remove the manual shaft oi! seals with a screwdriver.
(2) Drive in new left and right oil seals with a socket wrench.
Оригинальная страница руководства
