1989-Montero · auto tranny · страница 83 из 109 · Открыть оригинал PDF ↗
- Transmission and Transfer Assembly
(1l)lnstall the snap ring on the front planetary ring gear.
(12)Set the front planetary ringgear on the output shaft drum.
Align the ends-of the snap ring with the wide gap between
the teeth.
(13)While pushing down the front planetary ring gear, squeeze
the snap ring ends to install it into the groove.
(14)lnstall the nylon washer in the front planetary gear. facing
the lugs downward and aligning them with the slots in back
of the planetary gear.
(15)lnstall the one-way clutch and snap ring into the front
planetary gear, facing the spring cage toward the front.
(16)lnstali the reaction plate on the planetary gear for testing
purpose.
(17)Test the one-way clutch.
The planetary gear must rotate freely counterclockwise and
lock clockwise.
If the clutch does not work correctly, it must be replaced.
(18)Remove the reaction plate.
I I
(19llnstall the thrust washer (steel washer) coated with
petroleum jelly on the front planetary gear.
1 TSB Revision
Оригинальная страница руководства
