1989-Montero · auto tranny · страница 46 из 109 · Открыть оригинал PDF ↗
(20) Using a 10 mm (.39 in.) socket, push the plastic throttle
cable retainer out of the transmission case to remove the
cable with retainer.
(21) Position a rag to catch each piston. Blow low-pressure
compressed air (100 kPa, 14.5 psi) into each of the holes
shown to let the piston into the rag.
Remove the pistons and springs.
Caution
l Keep face away to avoid injury.
l Do not use high-pressure air.
(22) Remove the parking lock linkage:
(a) Remove the cam plate.
(b) Remove the parking lock rod.
(c) Remove the spring, pivot pin and parking lock pawl.
(23) Remove the manual lever and shaft:
(a) Using a hammer and punch, drive out the pin.
(b) C$dz. the shaft out the case and remove the detent
(24) Place the transmission on a cylindrical stand for mure
efficient work.
Caution
l Place shop rags between the case and stand to
avoid damaging the case.
Оригинальная страница руководства
